Velg landVelg land
Norge - Fagfolk/prosjekt

iQ Toro SC

Picture of iQ Toro SC

Homogent el-avledende spesialgulv for lokaler der elektronisk utstyr monteres, repareres, oppbevares eller brukes. Elektrisk gjennomgangsmotstand 106 Ohm, klasse ECF. Limes med vanlig gulvlim. Over kopperbånd skal et ledende gulvlim med permanent avledende egenskaper benyttes. Overflateforsterket med el-avledende PUR. Vekt/m² 3,0 kg.

Bruksklasse 3 ... Se mer
Homogent el-avledende spesialgulv for lokaler der elektronisk utstyr monteres, repareres, oppbevares eller brukes. Elektrisk gjennomgangsmotstand 106 Ohm, klasse ECF. Limes med vanlig gulvlim. Over kopperbånd skal et ledende gulvlim med permanent avledende egenskaper benyttes. Overflateforsterket med el-avledende PUR. Vekt/m² 3,0 kg.

Bruksklasse 34/43. Antistat. Brann - klasse BflS1. Elektrisk avledende. Godkjent for trinsehjul. Vis mindre

  • For sensitive miljøer
  • 14 farger finnes både på rull og som fliser
  • 2 mm tykkelse
  • Fargematches med iQ Granit
  • Markedets beste livssykluskostnader

Design

  • light grey
  • grey
  • dark grey
  • black
  • beige
  • yellow beige
  • light blue
  • white
  • lightyellow
  • brownyellow
  • light brown
  • brown
  • green
  • grey
TEKNISKE EGENSKAPER
Lysbestandighet (EN ISO 105-B02 ) - Nivå ≥ 7
brann Bfl-s1
Elektrostatisk opplading vertikal motstand (EN 1081) - Ohms R1 5x10⁴ ≤ R ≤ 10 / R2 5x10 ≤ R ≤ 10
elektrisk motstand R ≤ 10
Elektrisk isolasjon (VDE 100, Part 600) - Ohms R1 ≤ 5 ≤ 10
Elektrostatisk opplading (EN 1815) < 2
Varmemotstand (EN 12667) - m² K/W Approx. 0.01
varmeledningsevne Approx. 0.01
godkjent for sterile rom A
Bakteriemotstand (EN ISO 846 Part C) Does not favour growth
Fleksibilitet (EN 435 Method A) - mm Confirm
TEKNISK BESKRIVELSE
Total tykkelse (EN 428) 2 mm
Tykkelse slipesjikt (EN 429) 2 mm
Total vekt (EN 430) 2.95
Enhet KG/M²
Inntrykksmerker (EN 433) - mm ≤ 0.10 (Average measured value: 0.02 mm)
GENERELL BESKRIVELSE
Beskrivelse (EN 649) ISO 10581: Permanently static conductive pressed homogeneous vinyl flooring. Type I.
SERTIFISERING OG KLASSIFIKASJON
Klassifikasjon - offentlig (EN 685) - Klasse 34
Klassifikasjon - industriell (EN 685) - Klasse 43
U - Upec classification U4
P - Upec classification P3
E-Upec klassifikasjon E2/3
C - Upec klassifikasjon C2
NF UPEC certificate number 312-016.1
Trinnlyds forbedringsverdi (EN ISO 717-2) - Lw - dB Approx. 4
Fabrikasjonsadresse Tarkett AB S-372 81 Ronneby Sweden

TARKETT’S BALANCED CHOICE The iQ range is part of Tarkett’s choice of sustainable solutions. It is an integrated system that allows for balancing all the competing needs, while making choices that are truly sustainable and work together aesthetically.

Better Raw Materials Tarkett’s iQ products are based on up to 59 % natural raw materials such as salt and mineral fillers. We use local suppliers as much as we can, to reduce the environmental impact from transportation.

Resource Stewardship Tarkett’s iQ range is produced in Ronneby, Sweden. The factory has an environmental management system (ISO 14001) and has continuously reduced its environmental impact since 2003: 54% reduction of total amount of waste produced in the factory 60% reduction of VOC emissions. The factory manages water consumption via a closed loop and 53% of the energy used comes from renewable sources (hydro power, wind power, bio fuels) As for all Tarkett sites, the Ronneby site is assessed from an environmental point of view by an external auditor every two years. No risks were identified in the Ronneby site during 2009.

People-friendly Spaces Tarkett’s iQ range delivers valuable health, hygiene and welfare benefits: No need for polish or wax, for ever, due to the unique Surface Restoration properties. This reduces the strain on cleaning staff and minimises the need for water, detergent and energy for cleaning and maintenance. Low-cost cleaning and maintenance with savings in excess of 30 % give the market’s best Life Cycle Cost and a measurable enhanced ROI. Very low VOC emissions contributing to good indoor air quality: For the iQ range an average <20 μg/m3 at 28 days – 50 times below the European Standard (1000 μg/m3).

Reuse and Recycle Tarkett was one of the first flooring companies to recycle post-production waste and remains the industry leader. During 2008, 411 tons of flooring material was collected through out Europe and recycled at the Ronneby site. The IQ range produced at Ronneby on average contains: 25,5% combined post-production/post-installation waste The use of post production material has increased by 26% since 2003. ISO 14001 certificate n°2000-SKM-AQ-886 ISO 9001 certificate n°2000-SKM-AE-255

Alternative produkter